Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Horn Bracket fasteners
How are the fasteners shown on the horn in the pic removed? I need to replace the mounting bracket. Bill ![]() |
Bill Reid TD4618 |
Take the cover off and look. |
George Butz III |
"Take the cover off and look." That's nuts. :-) |
Christopher Couper |
Yes; Remove the cover! I believe the two nuts on the right are on the fasteners you want to loosen. From the looks of your horn you may need to drill out the fastener cover rivets and replace with machine screws. Jim B. ![]() |
JA Benjamin |
Bill, Chris is being facetious. Unscrew the cover screw and take off the cover. You'll see that are some screws holding the system together. Two of them are long and go through the mount. Just take off the nuts as shown. Bud
![]() |
Bud Krueger |
I got it.... |
Bill Reid TD4618 |
This thread was discussed between 02/04/2020 and 10/04/2020
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now