Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Horn button connection
On my 1950 TD the horn button connection (40 Brown/Black) passes through the back of the horn push/dipper switch. Would some one be able to advise me as to where or how it is connected internally. A photo would be great if possible. Many thanks. |
J Walton |
See http://www.ttalk.info/Horn_Button/ by Patrick Earles. It may have what you need. Bud |
Bud Krueger |
Many thanks Bud. John...Sydney |
J Walton |
What I would like is to know how and where does the wire connect internally.Perhaps I am missing some part?? |
J Walton |
The horn power wire is connected to the center contact as shown in the Patrick Earles photos above (photo 7). There were apparently different attachment methods, as on the ones I have repaired there is a hole drilled horizontally through the center contact and the wire is inserted through that hole and soldered in place. |
Lew Palmer |
Thank you Lew, I have soldered my wire to the back of the cap which makes the contact . It now works for me . What a terrible design. I think the switch was designed during one of Mr Lucas's nightmares. |
J Walton |
This thread was discussed between 25/11/2018 and 27/11/2018
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now