MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - List hardware floorboards TF

Does somebody has a list of the hardware needed for fitting the floorboards in a TF?

How much dished washers , bolts, wood screws, etcetera?
Length of screws/bolts?
John van den Boorn

John

Here is a link to source a complete kit:

www.angloparts.com/en/catalogues/part/31782/133.305

Unfortunately a list of individual components is not included.


Graeme
G Evans

> Floorboard Fasteners
Click this link to open the file. Then click on the "download" icon to download (downward ponting arrow with a bar across the tip)
https://drive.google.com/file/d/0BxisXBEpc-IWa25XaHc4akNPd28/view?usp=sharing

> Installation sequence (third post in the thread):
http://www2.mg-cars.org.uk/cgi-bin/gen5?runprog=mgbbs&access=&mode=archiveth&subject=8&subjectar=8&thread=2016052700282532485

> It the installation sequence link doesn't work, then search the archives for Thread Title:
Floorboard/prop shaft supports

Lonnie
TF7211
LM Cook

Error in the Floorboard Fastener link. Click this link, then download:
http://drive.google.com/file/d/0BxisXBEpc-IWa25XaHc4akNPd28/view?usp=sharing

Lonnie
TF7211
LM Cook

The hardware to secure the sliding cover for the brake cylinder access is not included in Roy's drawing. As it's a part of the floorboard installation, I've included a pic of that section of an original floorboard, showing one of the Tee nuts. The thread is 2 BA which was confirmed by installing a brass 2 BA machine screw as shown. Roy's drawing is of a pair of LHD floorboards. The table accompanying the drawings suggests that all TF/TD hardware is Phillips head (which I assume is correct for a TF? Rob, Matt?). Worth noting that the TD fixings however were all originally slot heads. Cheers
Peter TD 5801

P Hehir

check with fromtheframeup.com

They have almost everything around and prices are fair for all.
M Grogan

Many thanks for the link Lonnie!!!

Great info.
John van den Boorn

There was a gradual change over from slotted to Phillips which did not always match the model change. I would expect most TF's to be Phillips.
Attached a pic of my RHD pedal area.

Matthew.

M Magilton

This thread was discussed on 19/02/2017

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now