Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Looking for Shorrock supercharger intake for XPAG
I'm looking for the intake manifold for a Shorrock supercharger for an XPAG. Any leads would be appreciated. Thanks. |
Ahrendt |
Did you try Tom Lange? Be well, David |
D. Sander |
Or Hugh Pite. jenntoo@shaw.ca Jim |
James Neel |
Are you looking for the large manifold that attaches to the head or just the elbow the carb is attached to? |
JIM N |
Jim, I'm looking for the elbow from the carb to the blower. |
Ahrendt |
I think that this is the manifold you need. The one shown is from my installation kit, however it has one damaged, and a badly repaired threaded hole. I am considering getting one/some remade. If you are interested let me know and I will put you on my list. John ![]() |
J Scragg |
John,
That certainly looks like the manifold I need. The one I have has the square flange badly cracked and much thinner and there is serious corrosion at the apex of the bend in the tube. Mine has no threaded holes. I have been emailing Chris Samson in England as he does a number of parts for Shorrocks. He says he is planning to produce some of these in maybe the July/August timeframe. Maybe it would be better to have one source. But, just in case, put me down on your list as interested, Dave |
Ahrendt |
Dave, Good news to learn that Chris is planning to refab. these manifolds In the past I have bought some parts from him I know that his work is excellent. In that case I will see with Chris on how we can proceed. Also I will see if he is prepared to make a modern coupling between the supercharger output shaft and the nose extension, the original is a weak design. John |
J Scragg |
This thread was discussed between 24/04/2022 and 28/04/2022
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now