MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - meassurement starting crank clamps

I'd purchased the clamps fpr the starting crank.

Can anybody tell me where to fasten these parts at back of the seats please.



Bela

bela
i did a search in the archives and came up with this
http://www2.mg-cars.org.uk/cgi-bin/gen5?runprog=mgbbs&access=&mode=archiveth&subject=8&subjectar=8&thread=201411162152324900


I searched for SEAT BACK DIMENSIONS

Steve
Steve Wincze

This is for a TD. I think the TF goes somewhere else.

I have just mailed this to Bud.

If you cant read it send me you URL and I will email it.

mgtd51-at-verizon-dot-net

Jim B.

JA Benjamin

Thank you - that will help!

The early bird is not always the best bird.

I'd purchased two (Abingdon Spares) and now I realize it must be 3 pieces.

Bela

The drawing is missing the third hole for the stud that holds to tonneau cover snap - I see only two holes for the three elastic straps that hold the tonneau.

Very nice drawing - very helpful.
DLD

A fellow TD owner here purchased the clamps & was dismayed at how they ate the paint off his superbly finished crank handle. It was suggested a strip of bicycle tube rubber glued inside the clamps may preserve the finish. Before I fit my new clamps I'll experiment. Not sure if the clamps were at fault or if this was inevitable.. Cheers
Peter TD 5801
P Hehir

Also a helpful hint - thanks Peter.
Bela

This thread was discussed between 05/02/2016 and 06/02/2016

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now