Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Pedal Box Hole
Was there ever a factory plug for this hole in the bottom of the pedal box? I understand that Declan Burns has them, but I don't have his contact information. PJ![]() |
PJ Jennings |
No, but I found a big rubber plug at a hardware store, and it fits fine. I'm sure there are many on-line also. Tom Lange MGT Repair |
t lange |
Thanks Tom, I'll check at Lowes.PJ |
PJ Jennings |
Declan does have the plug and a gaiter for the rod. However I received a message from his partner that he is in hospital or was as of the 24th. His e-mail is: declan_burns@web.de Jim |
James Neel |
Thanks Jim, Sorry to hear about Declan, hope it isn't serious. PJ |
PJ Jennings |
Is the diameter the same as the hole above on the footwell? If so you could use the plug. |
Christopher Couper |
Chris, I think it's smaller, not sure but will check. PJ |
PJ Jennings |
The box opening is much larger. |
L E D LaVerne |
I wonder about the need for putting a plug in that hole. I just took my car apart and after 15 years, there was little dirt in the box. |
Bruce Cunha |
Keeping the dust and grit away from the shaft and bushings would be good preventative maintenance I believe. Jim |
James Neel |
Paul what about a sheet metal cap with the fingers as used to plug holes in the Arnolt heater for example. They come in many sizes. Grainger may be a source for them. Bill Chasser TD-4833 |
W A Chasser |
Thanks Bill, I'll look on Graingers site. PJ |
PJ Jennings |
This thread was discussed between 27/04/2018 and 30/04/2018
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now