Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Seatbelt Cad Drawing Needed
Does anyone have an existing CAD file for the 3 pieces of seatbelt mounting hardware, as shown by Horst Schach? Thanks very much. Tom Lange MGT Repair |
t lange |
Tom - if all else fails, I have a set of the pieces somewhere in my stash of goodies that I could send to you to be converted to a drawing. Cheers - Dave |
DW DuBois |
Thanks, Dave - I've got a water jet guy to make some, but he needs a CAD drawing first. The illus in Schach's book is natural size, and if nobody responds, I'll see if he can do it from the drawing. Tom Lange |
t lange |
Tom- Is this what you're looking for? Roy ![]() |
Roy Challberg |
And here's the second page. Roy ![]() |
Roy Challberg |
Just beware - they may work perfectly on a TD, but they don't on a TF - that is the outer rear floor mounting doesn't as it prevents the seat going right back. You need a different shape for that one. Dave H |
Dave Hill |
Yes, Ray, that's what I am hoping to find in CAD form, on the chance that someone has had them made on a waterjet already. I hate to re-invent the wheel... But not having heard anything positive, I suppose I will just have to go ahead and pay to have them converted to a CAD file. Thanks for the help, all. Tom Lange MGT Repair |
t lange |
Roy's drawing is available from the link on the home page http://www.ttalk.info/ Bud |
Bud Krueger |
This thread was discussed between 04/02/2016 and 05/02/2016
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now