Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Side curtain fitting?
This must be for the rear side curtain. Is there a fitting that goes in there?
|
| Bill Reid TD4618 |
| Sadly yes. And it may be difficult to install them now that the tub is painted. There is a left and right side piece. The off center middle screw engages the hook in the side curtain frame. Bill Chasser TD-4834
|
| W A Chasser |
| Thanks, Bill My wood was in such bad shape that I must have missed them. Oh well, onward and upward!. |
| Bill Reid TD4618 |
| Bill Reid: Just chisel away the wood at the bottom so you can slide the fittings up into the slot. The screws will secure them just fine. You may have to take a Dremel tool to the sheet metal at one or two of the screws to give you access to a driver. I would suggest a Philips head in that case so its smaller. |
| Christopher Couper |
| Thanks, Chris Abingdon has replacements, which I have ordered. However, they don’t have a screw extending into the pocket. Is this third screw necessary to hold the side curtain in place? Looking at Bill’s picture, it looks like this could be added. |
| Bill Reid TD4618 |
| Yes the third screw acts as the pin to engage the frame hook. |
| W A Chasser |
This thread was discussed between 14/10/2020 and 15/10/2020
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now