MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG TD TF 1500 - Space TF Fender tie bar to rad

The original brackets that bolt to the fenders are long gone and I made new ones but am not sure if they are right. What is the space between the back face of the rad and the tie bar? As it is now the space is 3 inches.
Rb Harding

TF fender strut location

http://www.mg-cars.org.uk/mgtf/Pictures/TF9052/Thumbnails/mgtf_tf9052.htm

You should be able to scale the location from one of the engine compartment photos in this file.

T W Moore

I have the assembly in a box in my shop if you need some measurements
MG LaVerne

Rb
Just measured mine. 3 inches from back surface of rad to front edge of tie bar.

Tom
'54 TF
T Norby

My bar goes right centerline over the v-groove of the water pump pulley.
Alex Waugh

Looks like the 3 inches is correct but the bar interferes with the radiator stay bars. I an fairly certain that the brackets on the rad are correct. Once I am back in town I will attach a photo.
Rb Harding

The attached might help. I made these a couple years ago and work well. It will give you the mounting holes to the fender/side wall as well as the dimension down to the mounting surface allowing clearance over the water pump.

Peter Dahlquist

This thread was discussed between 12/10/2015 and 16/10/2015

MG TD TF 1500 index

This thread is from the archives. Join the live MG TD TF 1500 BBS now