Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - Testing SU pump on the bench
Can you test a pump on the bench (for a few seconds)with no fuel?? I don’t fancy a can of petrol and a battery!! John |
J A Davies |
No problem, if you don't fancy petrol jus run water through it to test and then air to dry it out. Ray TF 2884 |
Ray Lee |
To get all the water out, you would neeed to remove the aluminum pieces and dry them out. water in the aluminum pump pieces don't like water sitting in them. Your best bet is to use some cleaning solvent (paint thinner, etc.) to test the pump. Cheers, |
DW DuBois |
Use paraffin, its much safer than petrol, and if a trace is left, it's miscible with petrol. Dave H |
Dave Hill |
I believe on this side of the pond paraffin is known as kerosene. Jim |
James Neel |
Correct. Dave H |
Dave Hill |
or run some diesel fuel through it--less chance of fire if that's the issue |
William Revit |
This thread was discussed between 18/10/2018 and 19/10/2018
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now