Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - TF body tub trolley
| Does anybody have a sketch of a TF body tub trolley? I would like to make one to put the body on for painting. If no-one has any drawings then I will measure it up and post the results after I make the trolley. |
| Max Irvine |
| Found sketch but can't remember where. Craig produced it and I have used it. Just add the wheels. Works great...It is a pdf file so can't load it on thread so if you post your email I can send you the file. bob |
| R Brown |
| I made one out of 2x4s and casters, worked great! Not much of a picture, but the idea is there. PJ |
| Paul S Jennings |
Pic, Think I'd get used to this web site by now! Forgot the pic. It doesn't have to be fancy, just strong enough to hold the tub. PJ
|
| Paul S Jennings |
| Bob- Open your PDF copy of the sketch and then save it as a JPEG file. You then should be able to upload it to your thread comment. Cheers, Roy
|
| Roy Challberg |
| Max, I made one similar to Paul's out of 2x4s and 2x6s and mounted it on rollers. I'm sorry I have no sketch. Bill TD24570
|
| Bill Brown |
| I made one. I will try to find the sketch of the plans. David |
| D. Sander |
| Thanks of the feedback. I made one for my TC which works well. The TF body hole centres are really what I would like. The rear hole centres and elevation are a little difficult to measure. |
| Max Irvine |
| A diagram is in the technical section od my website. warmly, dave |
| Dave Braun |
| Thanks Dave, Exactly what I need. |
| Max Irvine |
This thread was discussed between 19/06/2015 and 20/06/2015
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now