Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - TF Hood bow rivets
Need correct size and a supply source for hood bow steel rivets, need two. thanks george |
G Mills |
Hi George. I had no luck finding these for the TD so had a mate turn up a couple on a lathe in mild steel using the existing originals as a template. Cheers Peter TD 5801 |
P Hehir |
Thanks mate thought that may be the case. |
G Mills |
George,Try a saddler, they might be able to assist. |
G Evans |
I made mine from a similar sized machine screw. I ground the head down, cut to leingth and peened the end over with a hammer. It fits the part. Be well, David |
D. Sander |
All sorted, local hardware store had the exact size cup head bolts. Thanks |
G Mills |
This thread was discussed between 13/06/2016 and 14/06/2016
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now