Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG TD TF 1500 - wire loom support
Can anyone with a TF give a description of how the under dash wire loom is correctly supported from where it comes thru the fire wall grommet on the left side and behind the instruments than thru the fire wall grommet on the right side. Not sure if I should hang it from the hoop or if it was supported off the back or bottom of the tool box. Any help would be greatly appreciated. |
F. Driver |
Mostly rests on the tray frame from what I vaguely remember. Here is an image of my factory wiring I had to hand. Matthew. ![]() |
M Magilton |
And a dash shot. Matthew. ![]() |
M Magilton |
Thank you Matthew, it appears in your photo that it rises up near the hoop toward the center right side. I will see how that works tomorrow. |
F. Driver |
Keep in mind Fred, Matthews car is RHD. |
MG LaVerne |
Thanks LaVerne, how is the wire loom supported on your TF ? |
F. Driver |
This thread was discussed between 13/02/2016 and 14/02/2016
MG TD TF 1500 index
This thread is from the archives. Join the live MG TD TF 1500 BBS now