MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - 240Z Slotted Mags - Will they fit?

Has anyone fit a set of those aftermarket/dealer installed 14X6 slotted mags they used to put on 240Z's on a chrome bumper B? If so, did you encounter any problems? Thanks!

Scott
Scott Costanzo

The 4 x 4.5 bolt pattern datsun wheels have "0" offset. I have run them on both CB and RB cars. You may have rubbing problems on either of them, but more so on the CB cars.
Michael Wish

Scott, I have put these wheels on every car I can, thay look real good BUT thay have more offset & you have to put a wire wheel rear in (2" narrower) or the tires will rub. Ft. clear with 185-70x14
Glenn Towery

So, how much do these 240z rims weigh? About then same as Mini Lites?
Dana

Thanks everyone for your input.

Glenn, I have a wire wheel axle in the car and a disc wheel axle on the garage floor so I should be ok.

Scott
Scott Costanzo

Scott, For competitionon my '79 (R/B) I run 240Z 14" x 51/2" rims with 195/60/14 Bridgestone Potenza Racing tyres, and they work fine without any rubbing.
Kim.
Kim Popter

This thread was discussed between 10/12/2002 and 11/12/2002

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now