MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - Clutch master cylinder

Hi Guys
I have just rebuilt my pedal box new servo etc...
When i went to re-fit it it doesn't! It is a RB conversion and i have bolted on a new clutch master cylinder for V8 (GMC 1011)but it doesn't fit in the recess?

Have i actually got a 1011? the box says so but is it?
Does anyone have a picture of one fitted? The books don't say i have to make any modifications to the bulkhead.

If modifications are needed is there any way around it? I have resprayed the engine bay already and any modification would lead to tears!

Thanks in advance
Graham
GLG Lavis

Graham - got any pics? Can't recall if you are doing a CB or RB. If CB/sngle circuit brakes - you haven't got the brake and clutch masters swapped over have you?

Liam
Liam

Liam
Did you get the pictures i sent?

Graham
GLG Lavis

Yep, I have sent you a photo of mine.

Liam
Liam

Graham
The V8 Clutchmaster part number was BHA 5217
The pedal box was Ahh 8421 and cover AHH8556

I think many of the the American single line conversions will have been fitted from new with the V8 pedal box and cover otherwise the 1800 master AHH6553 and pedal box BHH1091 which is for dual line and servo.

Look for a re-importer ?

Roger
RMW

Roger
The V8 conversion book says the GMC1011 is the v8 clutch master cylinder. I have a rubber bumper UK car which i believe has still got the original pedal box.

I am about 1/2 inch to high to get into the recess and there would be no way to remove the filler cap.

Do you have a RB car? If so do you have a picture? and could i send you a picture?

Thanks
Graham
GLG Lavis

Graham
The Club and remanufacturers have changed many of the numbers and I only have the BL book to hand.

I have a RB GTV8 with the original fit and would be glad to send you pictures or the diagrams from the parts book.

If you want an off the cuff opinion from your pics pse do e-mail them asp.

Don't be daunted - the end product is a very good driver's car by any standard !

Roger
r.l.walker@btinternet.com
RMW

Graham,

Does the new master cylinder have a plastic reservoir?

Geoff
Geoff King

Geoff

It does have a plastic reservoir, The original 1800 one was metal.

Graham
GLG Lavis

Graham,

I thought so; I had the same problem three or four years ago and posted a warning here and on the MGOC board. I bought mine from the MGOC and when I explained to them that it didn’t fit I was told “Yes, they are a bit tight”, more than a bit tight in my opinion. They exchanged it for an older one with the metal reservoir and that fits without any difficulty. I have the later UK spec, duel brake circuit pedal box and master cylinders.

Geoff
Geoff King

Geoff
Would it be possible to get a picture of yours?

Thanks
Graham
GLG Lavis

Does anyone know where i can get hold of a V8 clutch master cylinder with the metal body? It seems i may be talking about some major body modifications if i cannot get hold of one.

Geoff, have you got a picture of yours?

Thanks
Graham
GLG Lavis

Graham,

I sent you a photograph a week or so ago showing the master cylinder fitted to my car; is there a particular angle or detail you a looking for? The shell has a RB bulkhead and I believe the MGOC obtained an old style master cylinder from Dave Vale at V8 Conversions, but that was several years ago. (p/n BHA 5217 and BAU5158 are superseded by p/n GMC1011).

Geoff
Geoff King

Geoff
Can't find your mail with a picture attached, Have spoken to Clive Wheatley and MGOC and they do not have the old style master anymore. It is looking like i will have to cut out some of my bay, a bit annoying as it is all resprayed and ready for the engine, wish this had been mentioned in conversion books.

Thanks
Graham
GLG Lavis

Graham,

I’ve sent it again but you received the first time because you sent a reply. I also sent a reference to an eBay item that showed a plastic reservoir installed – you replied to that too.

Geoff
Geoff King

Graham, I emailed you with the contact for a chap I know who is breaking a V8.

Liam
Liam

This thread was discussed between 08/04/2006 and 23/04/2006

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now