Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB GT V8 Factory Originals Technical - Hood Scoop
I'm thinking of putting a low profile hood scoop on my 77 B conversion. Not sure what type to use. Any suggestions? Thanks Jeff |
Jeff |
There was a thread on this board recently with a link to a supplier with a glass C type hood with a slightly raised center section and rear facing opening. Looked pretty neat and not too high to hamper vision. Check the posts for the past couple of months. I can't remember the subject of the original thread. |
Bill Young |
ck site--morspeedperformance.com they have the c-type and others in F/G; you can also add scoop for EFI clearance. perhaps a google search for "team liebre" would also direct you to this site. i am pleased with mine, but with F/G the final fit is up to you to make the lines fit. |
kelly h stevenson |
Also the differential expansions can wreck a nice job quick. |
vem myers |
Toms site is: http://www.morspeedperformance.com/index.shtml |
andy heston |
I bought one from a Hot Rod shop. I picked the lowest one they had & chopped it down further until it stands about 1" high. I can send a pix if you like. Barrie E. |
Barrie Egerton |
I used a scoop for a Cobra it works very well. |
T.P. Rosser 1 |
Jeff I can see you live somewhere sunny but Why ? Roger |
RMW |
Thanks for info and the link to liebre. That helped alot. As for living somewhere sunny. Don't think so, it's suppose to snow tonight. Gotta love it. Thanks again. Jeff |
Jeff |
I just did a "hood scoop" search on eBay for a Stag SHO project. I got a list of 726 sellers! M |
Marc Judson |
This thread was discussed between 11/11/2004 and 14/11/2004
MG MGB GT V8 Factory Originals Technical index
This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now