MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Recommendations

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - Manifold choice

What is the best manifold to use regarding performance and under bonnet temperature ?
Ian Kelly

Suggest you discuss this with Clive Wheatley 01902 330489

Roger
Roger

Ian,

Prob RV8 system using ceramic coating with twin balanced exhausts.

Paul
Paul

RV8 wrapped with fibreglass tape ( easily obtained from a plumbers suppliers)

Mike
Michael barnfather

Link to Camcoat

http://www.camcoat.u-net.com/Exhtprices2002.htm

There is also a choice of 4-1 or 4-2-1

Paul
Paul

Thanks for all your replies everyone,Ive got another question, has anybody got any templates for cutting inner wings for manifolds ?
Ian Kelly

Suggest you discuss this with Clive Wheatley 01902 330489
He sells the plates that finnish the holes off nice just draw round them and cut out the middle weld in the finnishers they fit well and look good
p Dorner

This thread was discussed between 17/08/2003 and 21/08/2003

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now