MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - MG 2001

Just curious if any other V8er's are going to MG 2001

Thanks Bill bill_jacobson@hotmail.com
bill jacobson

I may be flying to the great event, I will not stay for the whole week Just the last 3 days.
Bill Guzman

What when and where is it?

Larry Embrey

Larry
It's the week of the 4th of july,at St Paul Minnesota.
Bill
bill jacobson

Ahh, I won't be there, flying east for the 4th. Have fun all. Some take some pictures and email or send them to me, I'll throw a page up for the event..

BILL,
I got mounts taked in lastnight, should complete motor and tranny mounting today, then on to exhaust. Should be on road soon...
Larry Embrey

Larry, good news! Take lots of pictures of your conversion. I stoped the V8 project for a while busy building V6 kits, and now the coil over front suspension. To many projects. I will take pictures of the event and send them to you for your great web page.

BTW can you send me the web address for your web page? My computer crashed and lost all my fav. webs.

Thanks Bill
Bill Guzman

Bill,

Here's Larry's site:

http://www.larryembrey.com/mgb/PhotoAlbum/Index.htm

Also, do you have the v6 kit for the RB cars ready yet. I'm still comparing options (Rover V8 and GM V6), so let me know.

Thanks,

Steve Watson
Steve

I'm going to run the 24 hours endurance rallye from Monroe, Wisconsin to St. Paul on July 1st and 2nd. I'll be there for the rest of the activities.

See you there,

Al
Al Wulf

Thanks for the kind words Bill. I am taking pictures as I go. Right now I will not be developing them as I am trying to spend 100% of my non-work time to get it done...

Larry Embrey

We plan on attending the whole event.Looking forward to seeing Robert Milner of CA,and all other V8'ers from everywhere.Think they'll let us on the track?Yeh right!
Mike
Mike Moor

I'll be attending the entire event, sounds like a really good event. I had to miss the Florida V8 party and will looking forward to seeing all of you.

Bernie
Bernie Posey


Steve, the V6 kit for the RB is ready I had help from Brian in Mn and it came out great. The engine sets lower and a bit further back, this is possible due to the RB cars have more room in the engine bay.
Bill Guzman

Thanks for the replies guys. Bill, Al, Mike, and Bernie I'll see you guys there! We'll be there the whole week as well.
Bill bill_jacobson@hotmail.com
bill jacobson

This thread was discussed between 19/05/2001 and 28/05/2001

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now