Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB GT V8 Factory Originals Technical - Pilot bushing
|Anyone know the size this should be? Im using a Buick Skylark crank and an '88 GM BW T5. Inner dia, outer dia, and length would be great. Thanks.|
I am using the same setup. I just picked up a new pilot bushing at my local auto parts store. Use the stock Buick bushing for 1957-81 V8 engines. Luckily it has the same inner diameter that fits the GM T5 and was only a couple of bucks. I can mic it if you still need dimensions.
|Scott, thanks, I'll look for it. Any part number you can recommend? The local behind-the-counter parts guys are real lowbrows, and I know if I go in there and ask citing just the application, they won't know what to do.|
|'Autozone' and 'Advanced Auto Parts' are two local chains that carry this particular brand. It was a two-tone green blister box labeled GM CLUTCH PILOT BUSHING 14650. |
Thanks a ton, Ill check for it tomorrow.
|I picked up the pilot bushing today, was easier to get than I thought. I told them '63 Skylark for the application and they had it. 2.99 plus tax. Just FYI.|
This thread was discussed between 31/03/2003 and 09/04/2003
This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now