Welcome to our Site for MG, Triumph and Austin-Healey Car Information.
MG MGB GT V8 Factory Originals Technical - Trouble selecting reverse
| Hi, we have an MGB V8 conversion fitted with a Rover SD1 engine. we can't seem to select reverse - down and to the left. Any advice - suggestions? Thanks. |
| M Statham |
| If it's a LT77 box try up to the left. |
| Geoff King |
| Sometimes the selector detent gets full of Sh&t and is difficult to push over. Try spraying a bunch of WD40 into the selector mechanism. If it shifts OK then you should clean and re-lube the entire assembly. |
| M Mallaby |
| But you won’t find reverse down and to the left no matter how much WD40 you spray into the selector mechanism. |
| Geoff King |
| Up then left gets you into first, its hard left then up, don't need to push down towards the floor at all. |
| Liam H |
| He He, might depend on which side of the car your sitting... |
| M Mallaby |
This thread was discussed between 18/08/2007 and 29/08/2007
MG MGB GT V8 Factory Originals Technical index
This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now