MG-Cars.info

Welcome to our Site for MG, Triumph and Austin-Healey Car Information.

Parts

MG parts spares and accessories are available for MG T Series (TA, MG TB, MG TC, MG TD, MG TF), Magnette, MGA, Twin cam, MGB, MGBGT, MGC, MGC GT, MG Midget, Sprite and other MG models from British car spares company LBCarCo.

MG MGB GT V8 Factory Originals Technical - Wheels

I just installed a dana 44 rearend with 5 on 4.25" bolt pattern and would like to know if there is a hub with the same bolt pattern that will fit on an mgb front spindle.I would like to change to a nice set of aftermarket wheels.
Ken Blough

Ken, I believe that the MGC steel wheel hubs are this size. Not easy to find in the U.S., I realize.
Harry

Ken,
Try Volvos and Ford Thunderbirds to 1989. HTH
Stainzy

Not sure about fitting on front and rear, but I know theee' Mustang "Magnum 500" wheel looks a good bit like the MG Rostyle. Maybe converting th front end to the same 5 lug pattern and using them will be the best solution.. That or have the rear end chopped and put MGB tubes on it.

I think I heard something about porsche front hubs, but it has been a while, I forgot most of what I found as it was cost prohibitive for me..
Larry Embrey

Ken
I assume you want to go with the 5 lug bolt pattern, as I did as well. I went with MGC front hubs (5x4 3/4"
bolt pattern). Its the same pattern as most chevy cars and s trucks. Easy to find wheels but hard to find the hubs. I had a machine shop redrill the rear axle bolt pattern to match the front, it was 5"x 4 1/2" (chrysler).
If you can not locate a set of 5 lug hubs, another opition would be to have the rear axles redrilled to the 4x4 1/2" (MGB) pattern.

Bill bill_jacobson@hotmail.com
bill jacobson

Larry is correct the porsche hubs are a bolt on,you have to buy an adapter to mount the caliper which is usually a wilwood.By doing this you have lighter hubs as they're aluminum along with better and lighter calipers.You also have the oppurtunity of purchasing a very wide variety of porsche wheels.They have a lot of offsets and you can go as light as you can afford.
Can you tell i plan on doing this to my conversion......Greg
greg phillips

Are original V8 wheels still made and on sale ?
James Read

Greg and Ken,
I have the Porsche rotors and hubs installed with the Wilwood calipers. Works great and looka great too! No interference with the fenders evn with th 15x7 rims and 215/60x15 tires. If you need info for this mod, e-mail meand I sent some pics.
The Porsche I used for the parts is the 944
Relatively easy to find and not too expensive. I can provide you with th brackets if you go the Wilwood route.
About the Dana rear end. I am working on a Volvo rear end to fit the"B"
Werner
Werner Van Clapdurp

This thread was discussed between 06/02/2001 and 08/02/2001

MG MGB GT V8 Factory Originals Technical index

This thread is from the archives. Join the live MG MGB GT V8 Factory Originals Technical BBS now